get in touch
get in touch

Request a Quote

+46 (0)586 771 270

Latest news

Outlining Requirements for a Mobile Explosive Containment Vessel
Released in: 2019:04:25
Dynasafe announces the launch of its Dynalockr F7 and F10 explosive storage chambers


Released in: 2019:04:16

Learn more

DynaSEALR X-series Overview Guide


Dynasafe Protection Systems AB is certified according to ISO 9001:2008


Remote controlled DynaSEALR X10-DUR

Use the DynaSEALR X10-DUR to get close to identified dangerous objects in narrow surroundings. You can remotely move and manoeuvre the DynaSEALR X10-DUR into an area of risk, and remotely open and close the vessel.

The panel is wirelessly connected to the control cabinet to enable you to be positioned in a safe place while loading and unloading the vessel. Add the optional vision system to get full usage of the remote range of up to 300 m from the vessel. There is also a backup possibility to use a 50 m cable available.

The unit is self-propelled through internal electrical and hydraulic systems with at least an hour of operating time before recharging. Load large objects easily thanks to the wide opening and the possibility to rotate the cover with the loading tray up to 270°.


Contained gases can be kept inside until they are released through a valve system. Dynasafe can offer equipment to take air samples out of the closed and gas-tight vessel in order to determine if toxic gases are enclosed inside, as well as equipment to clean contained gases and decontaminate the chamber.




Note: The pictures are illustrative examples. Your DynaSEALR-product may look different. All technical data is indicative only. Contact us for further information.

Product data: 

Available options (not included in the standard version)


  • Remote controlled manipulator arm for loading and unloading.
  • Vision system to support the remote control.
  • Heating system, capable of heating the loading tray to approximately 350°C. This will cause explosives to burn, deflagrate or detonate.
  • Fragment shield to protect against fragmentation bombs.
  • Separate gas sampling equipment to take air samples out of the closed DynaSEALR.
  • A flat-bed trailer for long distance transport, equipped with loading ramps and a winch.
  • Decontamination equipment on a separate trailer, to treat contamination inside the closed vessel.
Table field: 
Rated explosion capacity5 kg TNTeq
Gross vehicle weight, unloaded~4200 kgExcl trailer or truck and optional equipment
Width (excl trailer or truck)1630 mmEquals 64.2 inch
Height (excl trailer or truck)1800 mmEquals 70.9 inch
Length, closed (excl trailer or truck)2850 mmEquals 112.2 inch
Maximum size of loaded object (LxWxH)900x500x450 mmEquals 35.4x19.7x17.7 inch (less with option)
Maximum weight of loaded object 50 kg
Product sheet

Enter information or login to download

Unloading of DynaSEALR X10-DUR from the trailer
DynaSEALR X10-DUR connected to decontamination equipment
DynaSEALR X10-DUR being loaded
DynaSEALR X10-DUR in action

Dynasafe MECV IDU product demo video